[ABANDONED] [ARM] JLink not working with cc1310f128 chip

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] [ARM] JLink not working with cc1310f128 chip

    Hello,
    I am having troubles while trying to connect to cc1310f128 via JLink EDU and Raspberry Pi 3 model B.

    I am using the latest versions:
    DLL version V6.16g
    Hardware version: V10.10

    I can successfully flash cc1310f128 chip from Windows 10 - Flash Programmer 2, so the chip itself and cable is working and I can even flash nrf52 chip from the same Raspberry Pi and JLink EDU, so JLink EDU seems to be working aswell.

    I have found this thread:
    old thread

    It seems that guy experienced troubles after he had updated firmware from 5.02e to 6.14a, I found 5.12e for Windows and tried it. Got another error.
    Is here anywhere still 5.02e JLink for ARM, so I could try it?

    here are screenshots:
    drive.google.com/drive/folders…RZbXlCZXlONTg?usp=sharing


    Thank you for your help!

    BR Vítek Udatný

    The post was edited 2 times, last by vudatny ().

  • Hi,


    Does this issue still occur when using the most recent version of the J-Link software & documentation pack (beta)?

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.