[SOLVED] J-Flash 5.12g CRC not consitant

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Flash 5.12g CRC not consitant

    Looking for some advise please

    when loading a .hex file the CRC result is 0xBCA5E367

    When programing using this file the CRC result is 0x8864DB7C

    The comment CRC of affected sectors verified successfully, dose this mean only reprogramed sectors have been used for the CRC?

  • Hi,

    could you please give the most recent version of the J-Link software & documentation pack a try?

    5.12g is quit old. I know there have been some fixes regarding log output of the CRC.


    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.