[SOLVED] J-Flash V6.14f fails to "Save Flasher data file"

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Flash V6.14f fails to "Save Flasher data file"

    When trying to save a dat file using version 6.14 the UI hangs (no responsive) forever, this functionality works as expected on version 6.00h.

    I'm using an NPX LPC1778 over SWD at 4000KHz if that helps.
  • Hi,


    When trying to save a dat file

    J-Flash "only" offers the following formats for data files:
    Motorola S file (.mot, .srec, .s, .s19, .s28, .s37)
    Intel hex (.hex)
    Binary file (.bin, .raw)
    ANSI C "file" (.c)

    How did you select .dat as a file format?

    Could you please provide us with a screenshot of the issue and the J-Flash project file? (.jflash)

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hi,


    Thanks, forgot about stand-alone mode.
    I just gave it a try and could not reproduce any issue.

    Could you please provide us with a screenshot of the issue and the J-Flash project file? (.jflash)

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hi,


    thanks for providing the file.
    We could reproduce the issue.

    I will update this thread one a fix is available.

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hi Forum,


    sorry for the delay in response.
    This issue has been fixed a while ago in the J-Link software & documentation pack.

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.