I am attempting to program/debug a Silicon Labs EFM8UB1 with my stand-alone J-Link. Simplicity Studio gives me an error (Failed to connect to target system, error code 131073).
The console gives me the following errors:
The console gives me the following errors:
Trying J-Link commander also fails:C:\SiliconLabs\SimplicityStudio\v4\developer\adapter_packs\usb\usb_monitor.exe C:\SiliconLabs\SimplicityStudio\v4\developer\adapter_packs\usb\usb_monitor.exe -d -s
C:\SiliconLabs\SimplicityStudio\v4\developer\adapter_packs\inspect_emdll\inspect_emdll.exe C:\SiliconLabs\SimplicityStudio\v4\developer\adapter_packs\inspect_emdll\inspect_emdll.exe -slist -sn 000XXXXXXXXX
list: 0cf3:e301@005:004[5&106A1F17&0&4] 04f3:21d4@005:009[5&106A1F17&0&9] 0c45:6713@005:012[5&106A1F17&0&12] 1366:0101@005:002[000XXXXXXXXX]
# Simplicity Studio device detection
deviceCount=1
device(XXXXXXXXX) {
serialNumber=XXXXXXXXX
Connecting to device with serial number XXXXXXXXX .. ok.
EMDLL version: 0.13.4b233
J-Link DLL Version: 6.14`
AdapterType=JLink
adapterLabel=J-Link EDU
inspect_emdll [ERROR: EMDLL error -501: GetDebugMode
]
inspect_emdll [ERROR: EMDLL error -501: AdapterInfoGet
]
boardCount=1
boardId[0]=0!
boardName[0]=8Éa
boardDescription[0]=
boardRevision[0]=ä249
boardSerial[0]=-1588265472
boardDate[0]=63655/63751/57344
inferPart[0]=no
}
Any ideas about what's going wrong?C:\Program Files (x86)\SEGGER\JLink_V614b>JLink.exe -device EFM8UB10F16G -if C2 -speed 1000
SEGGER J-Link Commander V6.14b (Compiled Mar 9 2017 08:46:23)
DLL version V6.14b, compiled Mar 9 2017 08:46:04
Connecting to J-Link via USB...O.K.
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware version: V8.00
S/N: XXXXXXXXX
License(s): FlashBP, GDB
OEM: SEGGER-EDU
VTref = 3.248V
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Device "EFM8UB10F16G" selected.
Selected interface (6) is not supported by connected debug probe.