Hello,
I use Ozone (x64) on Linux, version is 2.20g, compiled on 2016-10-05.
As target Device i chose STM32F407IE, target interface SWD, speed 1 MHz.
When I press "Finish" in this dialog then I see in the console window:
p, li { white-space: pre-wrap; }
J-Link software found at:
Project.SetDevice ("STM32F407IE");
Project.SetHostIF ("USB", "");
Project.SetTargetIF ("SWD");
Project.SetTIFSpeed ("1 MHz");
Project.AddSvdFile ("Cortex-M4.svd");
Project.AddSvdFile ("Cortex-M4.svd"): invalid filename
I thought this would be an internal error and you might be interested in it?
I'm not sure how critical this is.
Best regards
Torsten
I use Ozone (x64) on Linux, version is 2.20g, compiled on 2016-10-05.
As target Device i chose STM32F407IE, target interface SWD, speed 1 MHz.
When I press "Finish" in this dialog then I see in the console window:
p, li { white-space: pre-wrap; }
J-Link software found at:
Project.SetDevice ("STM32F407IE");
Project.SetHostIF ("USB", "");
Project.SetTargetIF ("SWD");
Project.SetTIFSpeed ("1 MHz");
Project.AddSvdFile ("Cortex-M4.svd");
Project.AddSvdFile ("Cortex-M4.svd"): invalid filename
I thought this would be an internal error and you might be interested in it?
I'm not sure how critical this is.
Best regards
Torsten