Flasher ARM: Stand alone mode does not execute 'start application' after programming

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Flasher ARM: Stand alone mode does not execute 'start application' after programming

    I configured 'Actions performed by "Auto" ' ticking Erase, Program, Start application in the Project settings window (Production tab). I start this with F7 in the JFlash environment and it works fine. The application starts after erasing and programming. After this, I downloaded the configuration to the Flasher. No error so far.

    I start the stand alone programming by pressing the start button on the Flasher. The erasing and programming work fine but the application do not start after the programming finished.

    What must I do to start up the target automatically after programming in stand alone mode?

    Thank you.
  • Hello CCV,

    currently the "Start target application" operation is not supported by Flasher ARM in Stand-Alone mode.
    We will implement this in one of our next releases.

    We will inform you as soon as the support is available.


    Best regards,
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.