Wrong ROM table

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Wrong ROM table

    I have the following problem with J-Link - when I download to flash, I get:

    Wrong ROM table component Id. Expected 0xB105100D, Found 0x00000000.

    I am working with IAR5 kick start edition and IAR evaluation board with STM32Fx103B processor.

    Booting the computer and board does not help.

    Yuval
  • Hello ybh,

    sorry for the long delay.

    Does this problem only appear if you are downloading into flash memory
    or when you are trying to connect to the board in general?
    Did the board ever work?
    If yes, when did it stop working?
    Do you use your own project or an IAR sample project?
    Can J-Link.exe connect to the board?

    Best regards,
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hello,

    I have the same problem:


    Writing bin data into target memory @ 0x08000000.

    ****** Error: Wrong ROM table component Id. Expected 0xB105100D, Found 0x00000000

    ****** Error: Failed to prepare for programming.
    Could not read target memory.
    Please check your flash settings!

    While im downloading my programm file. If I type 'h' for halt I get the same message.
    The binary contains a test programm what is written by me.
    JLinkExe can connect.
    I use the linux version of JLinkExe.