Wednesday, May 23rd 2018, 10:37am UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Rippe

Beginner

Date of registration: Jun 17th 2015

Posts: 2

1

Wednesday, June 17th 2015, 11:54am

embOSView V3.84 freezes when confirming new settings

Hi,
I have troubles with setting up embOSView V3.84.
First of all, I do not see the entire panel as shown below:
[img]https://photos-1.dropbox.com/t/2/AAD49-3MID3wOf-XBI1JLbiMTX61z4bvuNMryQanSPtACw/12/220348848/png/32x32/1/1434538800/0/2/emboseviewSetup.PNG/CLCDiWkgASACIAMgBCAFIAYgBygB/fdlqzEWOjVQ9TGNCPd59UZptOyUyHXJXs0xpF0NEiTQ?size=1600x1200&size_mode=2[/img]

(Setup->Communication->Type: J-Link Cortex-M3; Setup->Communication->Host Interface: USB Device 0; Setup->Communication->Target interface: SWD)

After pressing the "OK" button, the setup panel freezes and indicates in the title-bar that it is "Not Responding" anymore.

Any idea what could have gone wrong?
Roman

I am using a J-Link V.14-18: Windows 7 PC->USB->J-Link->SWD->Cortex M0

SEGGER - Til

Super Moderator

Date of registration: Nov 14th 2007

Posts: 271

2

Wednesday, June 17th 2015, 1:14pm

Hello,

unfortunately I cannot see you screenshot.
But could you please use the latest embOSView from https://segger.com/download_embosview.html and try again?
If the issue still exists please contact us directly via the embOS support email address.

Best regards,
Til

Rippe

Beginner

Date of registration: Jun 17th 2015

Posts: 2

3

Wednesday, June 17th 2015, 1:29pm

Hi Til,
the new version (V4.10b) works perfectly.
Thank you.
Roman

SEGGER - Til

Super Moderator

Date of registration: Nov 14th 2007

Posts: 271

4

Wednesday, June 17th 2015, 1:31pm

Hi Roman,

ok, thanks for your feedback!

Best regards,
Til