J-Link to program Silicon Labs SIM3C1XX ARM controllers

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • J-Link to program Silicon Labs SIM3C1XX ARM controllers

    Hi,

    I want to program Silicon Labs SIM3C134 32 bit ARM using the SWD interface. I am using Silicon Labs Precision32 as the IDE. It does not recognize the device and I don't know if it even recognizes the J-Link. Can anyone tell me the best way to do this? Maybe use one of the J-Link standalone programs with a HEX file?

    thanks

  • Hi,

    The SIM3C134 is supported by J-Link, so you should be able to use them.
    You can check whether the connection in general works by starting J-Link commander. (JLink.exe -device SIM3C134 -if SWD -speed 1000)
    It looks like the Precision32 IDE does not support J-Link, does it?

    To program the application for test purposes you can use J-Link commander (command loadfile),
    for production J-Flash (segger.com/jflash.html ) should be used.

    Best regards
    Johannes
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.