Gdb server refuses to work with AT91SAM9260-EK board

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Gdb server refuses to work with AT91SAM9260-EK board

    Hello,

    Hello,<br><br>When trying to use Segger's GDB server with an AT91SAM9260-EK evaluation board, I keep getting the message
    "Bad JTAG communication: Write to IR: Expected 0x1, got 0x0 (TAP Command : 2) @ Off 0x5."
    I have tried both version 3.80a and 3.91j.

    With an AT91SAM7X256-EK board it works flawlessly.

    What can I do?

    Thanks
  • Hello eranrund,

    we have tested J-Link GDB Server with the AT91SAM9260-EK and it works fine.
    We used embOS trial version 3.60d for GNU Tools, for testing.

    The trial version can be downloaded from our website: segger.com/downloads.html#embOS (embOS trial for ARM7/9/XScale and GNU)

    Can you try out this one and confirm that it works?

    Best regards,

    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.