Hi,
I'm currently working on my first segger app. so bear with me, probably doing something stupid.
I have cut the code down to the bare min.
STM32F103ZF, Keil, NT7534 Controller (4 line serial), GUIDRV_SPage.
I have written the interface function which work. All compiles OK.
When I run throught the code, it goes into GUI_Init, then GUI_X_Config, LCD_X_Config and initialises the LCD fine with LCD_X_DisplayDriver.
As it exits it runs some code until it get to LCD_FillRec and branches to a bad address (0x00) halfway through.
Can anyone help?
Stefan
I'm currently working on my first segger app. so bear with me, probably doing something stupid.
I have cut the code down to the bare min.
STM32F103ZF, Keil, NT7534 Controller (4 line serial), GUIDRV_SPage.
I have written the interface function which work. All compiles OK.
When I run throught the code, it goes into GUI_Init, then GUI_X_Config, LCD_X_Config and initialises the LCD fine with LCD_X_DisplayDriver.
As it exits it runs some code until it get to LCD_FillRec and branches to a bad address (0x00) halfway through.
Can anyone help?
Stefan