Hi

We have SK-MB9DF120-001 eval board and trying
to use J-link debugger to get connected.

When we connect Jlink and try to do a connect then we have the following error

SEGGER
J-Link Commander V4.50m ('?' for help)
Compiled Jul 20 2012 19:39:47
DLL
version V4.50m, compiled Jul 20 2012 19:39:26
Firmware: J-Link ARM V8
compiled Jul 20 2012 16:33:52
Hardware: V8.00
S/N: 58009069
VTarget =
3.248V
Info: TotalIRLen = 4, IRPrint = 0x01
******
Error: Bad JTAG communication: Write to IR: Expected 0x1, got 0x0 (TAP
Co
mmand : 10) @ Off 0x3E.
Bad JTAG communication: Write to IR: Expected
0x1, got 0xF (TAP Command : 14) @
Off 0x5.
JTAG Id mismatch. Expected:
0x0BA00000, found: 0x4BA07FFF)
No devices found on JTAG chain. Trying to find
device on SWD.
No device found on SWD.
Did not find any core.
Info:
TotalIRLen = ?, IRPrint = 0x..FFFFFFFFFFFFFFF042530003
Info: TotalIRLen = ?,
IRPrint = 0x..FFFFFFFFFFFFFFF050520001
******
Error: Failed to measure TotalIRLen.
No devices found on JTAG chain. Trying
to find device on SWD.
No device found on SWD.
Did not find any
core.
J-Link>