[Solved] SEGGER J-lInk GDB Server issue

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [Solved] SEGGER J-lInk GDB Server issue

    I can't get work the GDB server on linux either in v450i and v441g I always have "connection re-inialized by pairs"....
    I'm probably doing something wrong...

    Source Code

    1. "(gdb) target remote localhost:2332
    2. Remote debugging using localhost:2332
    3. Remote communication error. Target disconnected.: Connexion ré-initialisée par le correspondant.


    Source Code

    1. JLinkExe
    2. SEGGER J-Link Commander V4.50i ('?' for help)
    3. Compiled Jun 22 2012 19:00:38
    4. DLL version V4.50i, compiled Jun 22 2012 19:00:36
    5. Firmware: J-Link ARM V8 compiled Jun 19 2012 11:29:30
    6. Hardware: V8.00
    7. S/N: 268002308
    8. OEM: SEGGER-EDU
    9. Feature(s): FlashBP, GDB
    10. VTarget = 3.293V
    11. Info: TotalIRLen = ?, IRPrint = 0x..FFFFFFAFFFFFFFE0FFFFFFF9
    12. Info: TotalIRLen = ?, IRPrint = 0x..FFCBFFFFFFF1FFFFFFF87FFF
    13. No devices found on JTAG chain. Trying to find device on SWD.
    14. Info: Found SWD-DP with ID 0x2BA01477
    15. Info: TPIU fitted.
    16. Info: ETM fitted.
    17. Info: FPUnit: 6 code (BP) slots and 2 literal slots
    18. Info: Found Cortex-M3 r2p1, Little endian.
    19. Cortex-M3 identified.
    20. JTAG speed: 100 kHz
    Display All


    Source Code

    1. Listening on TCP/IP port 2331
    2. Connecting to target...ERROR: Could not connect to target.
    3. Restoring target state and closing J-Link connection...
    4. Waiting for J-Link connection...
    5. J-Link is connected.
    6. Firmware: J-Link ARM V8 compiled Jun 19 2012 11:29:30
    7. Hardware: V8.00
    8. S/N: 268002308
    9. OEM: SEGGER-EDU
    10. Feature(s): FlashBP, GDB
    11. Checking target voltage...
    12. Listening on TCP/IP port 2331
    Display All

    The post was edited 1 time, last by valere ().

  • Hi,

    Thanks for the info. Good to hear that you are up and running.

    Sorry for not explicitly getting back to you here. Please understand, that "support cases" in the forum can usually not be treated with high-priority.


    Best regards
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.