Tuesday, May 22nd 2018, 4:28am UTC+2

You are not logged in.

  • Login
  • Register

framonarco

Beginner

Date of registration: Jan 9th 2018

Posts: 2

1

Tuesday, January 9th 2018, 12:20pm

[SOLVED] Problem with J-Link SWD Isolator

Hello.

I have a J-Link Plus device connected to an J-Link SWD Isolator. A green LED and a red LED light up. With the JLink Commander program I execute the command "power on perm" and the two green LEDs light up. When I turn the J-Link Plus off and on, the green LED and the red LED stay on again. This parameter is not saved correctly. Do i have to do something else?

Thanks

Regards

SEGGER - Nino

Super Moderator

Date of registration: Jan 2nd 2017

Posts: 1,048

2

Tuesday, January 9th 2018, 1:50pm

Hello,

Thank you for your inquiry.
What exactly is the unexpected behaviour?
When turning J-Link off and on after power on perm, how many green LEDs are lighting up?
What J-Link software version are you running?
Could you post a screenshot of the commander output when your are executing the command?

Best regards,
Nino
Please read the forum rules before posting: Forum Rules

Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support contact us per e-mail.
The following contact form can be used for this: https://www.segger.com/about-us/contact-us/


framonarco

Beginner

Date of registration: Jan 9th 2018

Posts: 2

3

Tuesday, January 9th 2018, 3:11pm

Hello.


After executing the "power on perm" command several times, the information has been saved in the j-link.

Thank you very much for your help.

Regards