Sunday, April 23rd 2017, 7:48pm UTC+2

You are not logged in.

  • Login
  • Register

AnthonyG

Beginner

Date of registration: Feb 1st 2016

Posts: 7

1

Thursday, October 20th 2016, 10:51am

[SOLVED] In IAR C-SPY, NXP LPC2388 is really slow to load with JLink 6.10g

In IAR C-SPY, my code running on NXP LPC2388 is really slow to load with JLink 6.10g with NXP LPC reset mode and adaptive clock.


It is about 50 seconds.

With JLink 4.86a, it is 25 seconds.

With 5.02k, it is 35 seconds but the C-Spy cannot set breakpoints:

Thu Oct 20, 2016 10:20:37: Hardware reset with strategy 9 was performed
Thu Oct 20, 2016 10:20:44: 167676 bytes downloaded into FLASH and verified (14.01 Kbytes/sec)
Thu Oct 20, 2016 10:20:44: Loaded debugee: D:\repository\autooption\trunk\PROJECT\workspace\Debug_Flash_Rev2\Exe\autoOption.out
Thu Oct 20, 2016 10:20:44: Target reset
Thu Oct 20, 2016 10:20:44: Failed to set breakpoint at 0x00000008 (out of breakpoints?)
Thu Oct 20, 2016 10:20:44: Unable to set SVC Semihosting breakpoint
Thu Oct 20, 2016 10:20:44: Failed to set breakpoint at 0x000118D4 (out of breakpoints?)
Thu Oct 20, 2016 10:20:44: There was 1 error during the initialization of the debugging session.

How can it be improved ?

Thanks
Anthony

SEGGER - Niklas

Super Moderator

Date of registration: Oct 6th 2014

Posts: 1,221

2

Wednesday, November 30th 2016, 12:16pm

Hi Anthony,

V5.02k is a quite old version of the J-Link DLL. Can you please give it a try using the latest version V6.12 in order to exclude that this behavior is already fixed in the recent version? If the issue persists, we will quick check if the behavior is reproducible.

The latest version is available for download here: https://www.segger.com/downloads/jlink


Best regards
Niklas
Would you like to be added to the J-Link software update notification list, so you get informed automatically when a new version becomes available?
Just write me a PM or in case you want to subscribe to it yourself, please use this link: Link
Notification for J-Link, J-Link Debugger, SystemView & J-Scope: Link
Notification for Embedded Studio: Link

AnthonyG

Beginner

Date of registration: Feb 1st 2016

Posts: 7

3

Friday, February 17th 2017, 2:34pm

Resolved !

Hi Niklas,

it works well with J-Link v6.12j.

Thanks!

SEGGER - Niklas

Super Moderator

Date of registration: Oct 6th 2014

Posts: 1,221

4

Friday, February 17th 2017, 4:20pm

Hi Anthony,

thanks for the feedback and good to hear that you are up and running!

Best regards,
Niklas
Would you like to be added to the J-Link software update notification list, so you get informed automatically when a new version becomes available?
Just write me a PM or in case you want to subscribe to it yourself, please use this link: Link
Notification for J-Link, J-Link Debugger, SystemView & J-Scope: Link
Notification for Embedded Studio: Link