Wednesday, February 21st 2018, 2:17am UTC+1

You are not logged in.

  • Login
  • Register

Search results

Search results 1-6 of 6.

Thursday, October 29th 2015, 8:23pm

Author: leonarff

VNC Server of emWin 5.28 and 5.30 doesn't exist !

The VNC server has been removed from the latest versions of emWin of NXP libraries ? I tried to use it but the compiler shows error messages as if the functions of VNC server do not exist. I am using Keil v5.14 and emWin for Cortex-M3 v5.30 or v5.28b. [img]http://forum.segger.com/index.php?page=Attachment&attachmentID=804&h=f2d9b0cb234387329ef9e440c2148b452040f43e[/img]

Thursday, October 8th 2015, 5:46pm

Author: leonarff

emFile with NOR Flash Crash

I'm using emFILE v3.28 library for evaluating for EA1788 evaluation board with Keil IDE. I tried to run the physical layer FS_NOR_PHY_CFI_1x16 and could not. The flash is connected as follows: [attach]795[/attach] So I had to implement my own: C/C++ Source code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 8...

Tuesday, July 7th 2015, 3:23pm

Author: leonarff

emFile and NOR Flash problem

Stefan, Thank you for your help. Since I am evaluating emFile I think that there is no v4.0 compilation for Keil and LPC1788. I used FS_NOR_PHY_CFI_1x16 physical layer because my NOR is parallel and no SPI. I solved the problem by re-writing the physical layer. Thank you again for your help. Best regards. Leonardo.

Thursday, July 2nd 2015, 9:22pm

Author: leonarff

emFile and NOR Flash problem

I am trying to use emFile with SST39VF3201B microchip NOR flash. The code is: void FS_X_AddDevices(void) { FS_AssignMemory(&_aMemBlock[0], sizeof(_aMemBlock)); // Add driver FS_AddDevice(&FS_NOR_Driver); // Set physical type, single CFI compliant NOR flash chips with 16 bit interface FS_NOR_SetPhyType(0, &FS_NOR_PHY_CFI_1x16); // Configure a single NOR flash interface (4 Mbytes) FS_NOR_Configure(0, NOR_FLASH_BASE, NOR_FLASH_BASE, 0x00400000); } void MainTask(void) { FS_NOR_DISK_INFO DiskInfo; NO...

Friday, May 29th 2015, 3:27pm

Author: leonarff

Help Create a Button

Hello Oliver, Thank you for your help. I get the pressed button using the _callback_DefaultHandler of the cgi table ( WEBS_CGI ). Interestingly, the list is not only used for CGI coding "< ! - # Exec cgi = " anything " ->". Best regards, Leonardo F. Farah

Thursday, May 28th 2015, 9:21pm

Author: leonarff

Help Create a Button

Could anyone help me ?How can I create a web page with button that instructs server to turn on ou turn off something ? The examples with forms works but I donĀ“t get to identify that a simple button was pressed and what button. Thanks a lot. Leonardo F. Farah