Wednesday, December 13th 2017, 4:00pm UTC+1

You are not logged in.

  • Login
  • Register


Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, December 7th 2017, 10:40am

by SEGGER - Nino

Hi Kevin,

Thank you for providing the files.
We were able to reproduce the behaviour with the provided files.
To be sure where the issue is coming from we would need you to provide us your project (ideally) or at least the uVision project file to get an idea where this double information is coming from.
Could you provide this?
Do you build a library out of sources in your project and the library is being reused somewhere?
This might be a potential sources of this double display of some functions.

Best regards,

Thursday, December 7th 2017, 12:28am

by ktowers

The files are zipped and attached.

ktowers has attached the following file:
  • td3100.7z (427.41 kB - 10 times downloaded - Last download: Today, 3:38pm)

Wednesday, December 6th 2017, 9:25am

by SEGGER - Nino

Hello Kevin,

Thank you for your inquiry.
Such an issue is not known to us.
Could you send us your .jdebug file and the .elf file you are trying to debug for reproduction?

Best regards,

Tuesday, December 5th 2017, 6:48pm

by ktowers

Identical source files in Ozone

The Source Files pane in Ozone (v2.54 and older) shows two copies of most files. Some source (.c & .cpp) files have the little 01 10 binary icon beside them. These are the only ones that can have breakpoints set in them. The copies seem to be the source file with no additional value.

Where are these extra copies coming from?

I'm compiling with the Keil toolchain with -g on the compiler command line.