Wednesday, November 22nd 2017, 6:27am UTC+1

You are not logged in.

  • Login
  • Register


Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, August 11th 2017, 3:17pm

by SEGGER - Schoenen


This shouldn't be a problem. At least not when using the GUIDRV_Lin driver. emWin manages the framebuffer content. How these data get to the display is not part of emWin itself. In general this is done by the on board LCD controller of the STM32. If you configure the controller to 'feed' the HDMI interface it shouldn't be a problem to use it. The same is possible with the MIPI DSI interface. Unfortunately, we don't have a sample for this.


Thursday, August 10th 2017, 4:03pm

by prakash

Is it possible to output to HDMI using STemWin Library with STM32?

Hi All,

Is it possible to output to HDMI using STemWin Library with STM32?

Thanks and Best regards,