Wednesday, October 18th 2017, 6:38pm UTC+2

You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, October 12th 2017, 3:00pm

by je_electronic

I will, thank you for your help.

Thursday, October 12th 2017, 1:56pm

by SEGGER - Niklas

Hi,

Quoted

Is there anywhere I could find source code for ST_STM32F746G_Disco_QSPI

Could you please get in touch with the mail support?
They will provide you with the source code.

Best regards,
Niklas

Thursday, October 12th 2017, 11:04am

by je_electronic

J-Flash + custom ext. flash downloader

Hi,
I have a board that uses STM32F746 uC + S25FL128S QSPI ext. flash. I need to put data in it with J-FLash. As I understand it should be pretty straightforward when memory addresses are properly configured. I actually managed to make J-Flash start and finish the programming process. The problem is that it uses ST_STM32F746G_Disco_QSPI.elf as a flash loader and i have different pins for D0 - D3 signals, so naturally there is no data in the memory. So the option is to use Open Flashloader. However I would need to implement all functions by myself, where probably just reconfiguring these 4 pins would do. Is there anywhere I could find source code for ST_STM32F746G_Disco_QSPI or am I left with writing everything by myself with Open Flash loader Cortex-M Template?