Friday, May 25th 2018, 3:55am UTC+2

You are not logged in.

  • Login
  • Register


Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 387 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, May 2nd 2017, 9:48am

by SEGGER - Yan

The USBH and ISR tasks have to be present for exit to work.
Furthermore exit had a couple of issues when used with the ST drivers in V1.16. This was fixed in V1.30b.

Wednesday, June 15th 2016, 4:13pm

by nboutin

USBH_Init & USBH_Exit


I don't understand why this simple code would not work properly :

C/C++ Source code

void MainTask(void)

USBH_Exit() get stuck in a while loop in USBH_HW_STM32F2xxFS.c file in function static void _RemoveDriver(USBH_HC_HANDLE hHostController).
It seems that the variable _RemoveComplete is never set to a value different from 0.

For information:
- embUSB-Host version: V1.16e
- ┬ÁC : STM32L476VG

Thanks for your help,