Wednesday, December 13th 2017, 8:03am UTC+1

You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, November 17th 2017, 10:05am

by SEGGER - Til

Hello Marek,

Quoted

Is it possible to get the CMSIS-rtos solution as support from you?

Yes, sure. Are you looking for CMSIS-RTOS v1 or CMSIS-RTOS v2?
http://arm-software.github.io/CMSIS_5/RTOS/html/index.html
http://arm-software.github.io/CMSIS_5/RTOS2/html/index.html

We have support for both versions but they are sold separately.

Quoted

Is your solution compatible only with some specific embOS version (oldest which we are using is 3.88)?

CMSIS RTOS v1 layer can be used with any embOS version.
CMSIS RTOS V2 layer can be used with embOS V4.32 and later versions only.

But we still don't recommend to use such a wrapper at all since with it you can only use a fraction of the powerful embOS API.

Best regards,
Til

Thursday, March 23rd 2017, 12:21pm

by ComAp

request

Hello,


Thank you a lot for response.





Simple we want to unify access to RTOS.
Our common solution expect CMSIS-rtos and write wrapper to wrapper seems odd.





(By the way the similar ambition
we want to use for emFile, emUSB, emUSBH – but interface will be our,
proprietary)





Is it possible to get the CMSIS-rtos
solution as support from you?


Is your solution compatible only with
some specific embOS version (oldest which we are using is 3.88)?








Thank you


Regards


Marek Bílý

Embedded SW Engineer



ComAp a.s.

U Uranie 1612/14

170 00 Prague 7

Czech Republic


https://www.comap-control.com/

Thursday, March 23rd 2017, 9:22am

by SEGGER - Til

Hello,

we already implemented the CMSIS RTOS layer.
But this layer has a lot of disadvantages in comparison to our embOS API.
Please contact us directly for further information.

Best regards,
Til

Thursday, March 23rd 2017, 9:17am

by ComAp

CMSIS-rtos interface to embOS

Hello,
is it possible to make request to impolement the CMSIS-rtos interface to embOS?

Company which I represents would greatly appreciate it.

Marek Bily
ComAp a.s.